Creative Lighting

What are the sources of light in photography?

Sources of light in photography: natural daylight, continuous artificial light, flash and strobes, and ambient or practical light, plus color temperatures.

On this page
  1. Natural light
  2. Continuous artificial light
  3. Flash and strobes
  4. Ambient and practical light
  5. Reflected light and modifiers
  6. Color temperature at a glance
  7. Hard vs soft light
  8. Light falloff with distance
  9. Mixed light sources
  10. Common misconceptions
  11. Safety

The main sources of light in photography are natural light (direct sun, skylight, overcast skies, moonlight and reflected light), continuous artificial light (tungsten, fluorescent, LED and HMI), flash and strobes, and ambient or practical light, such as room lamps and screens. Each one has a different color, hardness and output, and they change the look of a photo in different ways.

Natural light

Natural light includes direct sun, skylight and open shade, overcast skies, moonlight, and light bounced off surfaces. The sun is very large but very far away, so it acts as a small, hard source. Clouds turn it into a large, soft source. Open shade and overcast skies are soft too, so sunlight is not always hard.

Continuous artificial light

Continuous lights stay on while you shoot, so you see the result as you work. Common types include:

  • Tungsten and halogen, at about 3200 K. They run very hot.
  • Fluorescent.
  • LED. Check the CRI or TLCI rating. A rating of 95 or higher is a good sign for accurate color. CCT and CRI vary between LEDs. For colored LEDs, see RGB LED lights for creative portraits.
  • HMI, at about 5600 K.

Flash and strobes

Flash includes speedlights, monolights, pack-and-head systems and built-in pop-up flash. Flash is about 5500 K, though this varies by unit. Flash freezes motion with very short durations, often between 1/1000 and 1/20,000 s depending on the power setting. Most cameras sync flash at 1/160–1/250 s, unless they support high-speed sync (HSS). This varies by camera.

Flash is not only for dark scenes. Photographers widely use it outdoors as fill light. See balancing flash and ambient light.

Ambient and practical light

Ambient light is whatever is already in the scene: room lamps, street lights, candles, screens and signs. Practical lights are sources that are visible in or near the frame, such as a lamp in a room. Ambient light can add mood, but it often mixes several color temperatures.

Reflected light and modifiers

Reflectors, walls and ceilings bounce light onto the subject. A light-colored ceiling bounce is soft and even. Modifiers, such as softboxes, umbrellas and grids, change the quality of a source so that it can be shaped or softened.

Color temperature at a glance

Source Approximate color temperature
Candle about 1900 K
Sunrise and sunset about 2000–3500 K
Tungsten about 3200 K
Midday sun about 5500 K
Overcast sky about 6500–7500 K
Open shade about 7000–8000 K
Blue sky 10,000 K and above

These figures are approximate. They shift with weather, time of day and location.

Hard vs soft light

Whether light is hard or soft depends on the size of the source relative to the subject, not on how bright it is. A large window or softbox is a soft source. A bare bulb or a small spot is a hard one. More watts do not automatically make light softer. For more, see hard light vs soft light.

Light falloff with distance

Light falls off with the square of the distance, which is the inverse square law. Doubling the distance from a light gives one quarter of the light, a drop of two stops. In practice, moving a light a little closer changes the exposure a lot.

Mixed light sources

Different color temperatures in one scene cause color casts. You can match the sources, or use gels to bring them to a common temperature. See colored gels for photography lights.

Common misconceptions

  • Sunlight is always hard. Overcast skies and open shade are soft.
  • Brighter or bigger lights are always softer. Softness depends on the size of the source relative to the subject.
  • All LEDs are daylight-balanced and accurate. Color temperature and CRI vary between models.
  • Flash is only for dark scenes. It is widely used outdoors as fill.

Safety

Tungsten and halogen lamps get very hot. Keep them away from fabrics and other flammable materials.

The complete guide to creative lighting

Smoke and Fog Photography Lighting
Read the guide

Keep exploring

Guides from other topics

All topics →