Setting up home studio lighting is mostly a matter of order. Get the room under control, place one main light, then add fill, separation and background light only where the picture needs them. A useful first setup can be one light and a reflector.
What you need before you start
- A space you can darken, with room for the subject, the light stands and the camera. Headshots fit in about 10 × 12 ft (3 × 3.7 m). Full-length work needs closer to 12 × 20 ft and a ceiling of about 9 ft (2.7 m) or more. For room planning, see how to create a home photography studio.
- At least one light with a modifier, such as a softbox or umbrella, on a sturdy stand.
- A reflector, and a way to trigger the light from the camera.
- A backdrop, if you want one. Seamless paper is a common choice.
For a fuller kit list, see the photo studio equipment list.
Step 1: Control the room light
Room light competes with your lights and mixes colours. Household bulbs are usually around 2700–3000 K, while studio strobes are daylight-balanced at about 5500 K (see color temperature in Kelvin). Switch off room lamps, and close curtains or blinds if daylight comes in.
With flash, at or below the camera’s flash sync speed, shutter speed changes only the ambient light. Sync speed is often somewhere between 1/160 s and 1/250 s, depending on the camera, so check your manual. To check how much ambient light you have, take a frame with the flash turned off. If you want a dark background, that frame should be close to black.
Step 2: Place the key light
The key is your main light. A common starting point is about 45° to one side of the subject and 30–45° above eye level. For a softbox, a distance of around 3–6 ft (1–2 m) is a reasonable place to start for many portraits.
Two things control how soft the key looks:
- Size relative to the subject. A larger modifier, or one placed closer, gives softer light.
- Distance. Moving the light away makes shadows harder and the falloff more even.
Put a white or silver reflector on the opposite side of the key to bounce some light back into the shadows.
Step 3: Add fill
Fill lifts the shadows. You can use a second light at lower power, or just the reflector from step 2. Light ratios give a sense of how much contrast you will get:
- 2:1 (1 stop difference): soft and open
- 4:1 (2 stops): moderate
- 8:1 (3 stops): dramatic
Measure with a light meter if you have one. Otherwise, check the frame and the histogram and adjust by eye.
Step 4: Add a hair or rim light
A hair light sits behind the subject, opposite the key, to separate them from the background. Many setups put it about 2–4 ft (60–120 cm) behind and above the subject. Set it by eye. Too strong and it looks like a halo; too weak and the edge disappears into the background.
Step 5: Light the background
If you want a dark background, leave it unlit. If you want it lighter, use a separate light aimed at the backdrop, and flag that light so it does not flare into the lens. The seamless paper guide covers this in detail.
The build order
- Key light, with a reflector on the other side
- Fill, from a second light or the reflector alone
- Hair or rim light behind the subject
- Background light, if needed
Add each light only when the picture needs it. More lights is not better. One light plus a reflector covers most portraits.
Camera and flash settings
A common starting point for strobes is ISO 100, around f/8 (somewhere in f/5.6 to f/11), and a shutter speed at or below your sync speed. Use flash power and aperture to set exposure, and use light distance and modifier size to shape the look. Changing the shutter speed below sync does not change flash brightness.
Check your results with the histogram rather than the camera’s LCD, which can mislead you in bright rooms. Tethering to a laptop or monitor makes it easier to judge focus and lighting.
Continuous light or flash?
Continuous LED lights let you see exactly how the light falls before you shoot, which helps beginners and also works for video. Strobes give more power and can freeze motion. Strobes are also daylight-balanced, which matters when you mix them with room light. Cheap continuous kits can be dim and colour-inconsistent, so check the output before you buy.
If you fire strobes off-camera, a 2.4 GHz radio trigger is generally more reliable than an optical slave, which can miss the flash.
Tips for shooting in a home studio
- Start with one light. Add a second only when a specific shot needs it.
- Keep the subject 4–6 ft (1.2–1.8 m) from the backdrop so the background stays separate and the subject does not throw shadows onto it.
- Shoot tethered if you can, and judge the shot on a larger screen or the histogram.
- Note or photograph your light positions and power settings so you can repeat a look later.
- Run a test session with the same subject before a paid shoot. You will find problems, such as hot spots or spill, while there is still time to fix them.
Common mistakes
- Thinking more lights is better. Extra lights add complexity. They don’t add quality by themselves.
- Expecting a large softbox far away to be soft. What counts is how big the light looks from the subject’s position.
- Changing shutter speed to dim the flash below sync. It only changes the ambient light.
- Mixing room light with strobes. Colour casts are hard to fix later.
- Skipping the test frame. A flash-off frame shows what the ambient light is doing.
Safety
- Sandbag every stand, especially booms and tall stands.
- Tape cables down wherever people walk.
- Keep modelling lamps and tungsten lights away from fabric and paper, because they get hot.
- Never open a strobe. Its capacitors can hold a dangerous charge.