Lighting Fundamentals

Color Temperature in Photography Lighting: Kelvin Explained

Color temperature, measured in kelvin, describes whether light looks warm or cool. Learn typical kelvin values, white balance and how to fix mixed light.

On this page
  1. What is color temperature?
  2. The kelvin scale runs opposite to intuition
  3. Common light sources
  4. Why color temperature matters
  5. White balance options
  6. Mixed light: match it or turn it off
  7. Gels, tint and LED quality
  8. Using color temperature creatively
  9. Common misconceptions

Color temperature, measured in kelvin (K), describes whether a light looks warm or cool. Low values are warm and orange, and high values are cool and blue. It’s a practical tool for matching light sources and setting white balance.

What is color temperature?

Color temperature describes the color of a light source by comparing it with the light from an ideal heated object, called a black body. The scale is named after Lord Kelvin. Low kelvin values look warm, and high values look cool.

The kelvin scale runs opposite to intuition

Many people think of orange as warm and blue as cool, and the scale matches that at the warm end. But the numbers run the other way. Warm light has a lower kelvin value, and cool light has a higher one. So when you read “5600 K,” think of a bluer, cooler light than “3200 K.”

Common light sources

These values are approximate. They vary with weather, power and manufacturer.

Source Approximate color temperature
Candle or flame about 1800 to 1900 K
Sunrise or sunset about 2000 to 3500 K
Household incandescent about 2700 K
Warm-white LED about 2700 to 3000 K
Studio tungsten or halogen lamps about 3200 K
Direct midday sun about 5000 to 5500 K
Daylight-balanced lights 5500 to 5600 K
Electronic flash about 5500 to 6000 K
Overcast sky about 6000 to 7500 K
Open shade or blue sky 7000 to 10,000 K and up

Daylight is not a single color temperature. It ranges from about 2000 K at sunrise to 10,000 K or more in open shade. For how each natural and artificial source behaves, see natural vs artificial light sources.

Why color temperature matters

When you mix sources with different color temperatures, you get color casts. Sunlight through a window mixed with warm room lamps gives uneven color across the frame, and fluorescent light adds a green or magenta tint.

The camera’s white balance tells it which color temperature should render as neutral. Set it correctly, and whites look white and skin tones look natural.

One point often confuses people. Setting white balance to 3200 K does not make the image warmer. It tells the camera the light is warm, so the camera removes the warmth, and the image looks bluer.

White balance options

  • Auto white balance is convenient, but it can struggle in mixed light or unusual color casts.
  • Presets include tungsten (about 3200 K), fluorescent, daylight (about 5500 K), cloudy and shade.
  • Custom white balance uses a photo of a neutral gray or white reference under the same light.
  • Kelvin setting lets you enter a specific value.
  • RAW files give you more room to correct white balance later than JPEG files do.

Mixed light: match it or turn it off

When sources differ, you have two options. Gel the lights to match the dominant source, or turn off the sources that conflict. Setting white balance to one source leaves the other to be corrected separately, so fixing the light itself is usually the cleaner option.

For a studio setup, the lights in a three-point setup should share one color temperature, or be gelled to match.

Gels, tint and LED quality

Gels are colored filters placed over a light. Warming gels (CTO, orange) move a cool light toward tungsten. Cooling gels (CTB, blue) move a warm light toward daylight. A full CTB gel cuts a noticeable amount of light, often about one to two stops.

Fluorescent lights and some LEDs add a green or magenta tint. Plus Green and Minus Green gels, or a tint control on the light or camera, correct it. Gel strength is measured in mireds (one million divided by the kelvin value), not kelvin, so use mireds when you compare gels.

LEDs vary widely. A CRI (color rendering index) of 95 or higher is a good target. TLCI and TM-30 are other ratings. Even a high CRI doesn’t guarantee accurate color under every camera, because sensors respond to light differently.

Using color temperature creatively

Color temperature is also a creative tool. Warm light suggests coziness and intimacy, such as candlelit scenes. Cool light suggests calm, distance or a misty morning. You can shift white balance on purpose to push a mood. A photographer might choose a cooler setting for a dawn landscape or a warmer one for an interior.

Common misconceptions

  • “Warm” colors have lower kelvin values, not higher.
  • Kelvin describes only the blue-to-orange axis. Green and magenta tint are a separate axis.
  • Flash isn’t exactly 5500 K. It varies with the model and the power setting.
  • High CRI doesn’t guarantee accurate color on every camera.

For a studio setup that depends on matched lights, see three-point lighting.

The complete guide to lighting fundamentals

Photography Lighting Techniques: How Light Shapes Every Photo
Read the guide

Keep exploring

Guides from other topics

All topics →