Lighting Fundamentals

How do I set up a three-point lighting system?

To set up three-point lighting, place the key first, then add fill, then the back light. Build one light at a time and meter each one before adding the next.

On this page
  1. What you need
  2. Step 1: Clear the room of other light
  3. Step 2: Set the camera
  4. Step 3: Place and test the key light
  5. Step 4: Add the fill light
  6. Step 5: Add the back light
  7. Step 6: Add a background light (optional)
  8. Step 7: Meter and check
  9. Common mistakes
  10. Safety

To set up a three-point lighting system, place the key light first, then add the fill light on the opposite side, then add the back light behind the subject. Build one light at a time, and meter each one before you add the next.

What you need

  • Three lights. Speedlights, monolights and LED panels all work.
  • A modifier for the key light, such as a softbox or umbrella.
  • A fill light, or a white reflector or foam board.
  • A back light with a grid or snoot to control spill.
  • Light stands, sandbags and a way to tape down cables.
  • A flash or incident meter, or a camera with a histogram for test shots.
  • Room space. A small room of about 3 × 4 meters works with speedlights. More space depends on focal length.
  • Lights of matching color temperature, or gels to match them.

For the roles each light plays, see three-point lighting.

Step 1: Clear the room of other light

Turn off room lights and any other sources you don’t control. When you control all the light, each light you add has a predictable effect.

Step 2: Set the camera

Set the camera to manual, and use these as starting points:

  • ISO 100
  • An aperture of about f/5.6 to f/8
  • A shutter speed at or below your camera’s flash sync speed, which is often between 1/160 and 1/250 second

Adjust from there once you see the first test shot.

Step 3: Place and test the key light

Place the key about 30 to 45 degrees off the camera’s axis and about 30 to 45 degrees above eye level. Adjust it until the nose shadow forms the pattern you want, such as a loop or Rembrandt pattern. Judge the key on its own, before adding anything else. For choosing a modifier, see hard light vs soft light.

Step 4: Add the fill light

Place the fill on the opposite side from the key, near the camera’s axis. Set it about 1 to 2 stops below the key, which is a ratio of 2:1 to 4:1. A reflector on the opposite side works too. Check that the fill isn’t creating a second nose shadow. For the ratio math, see lighting ratios.

Step 5: Add the back light

Place the back light behind the subject, opposite the key and above head height. Aim it at the head and shoulders. Use a grid or snoot, or flag the light, so it doesn’t hit the lens and cause flare. Adjust it until you see a clean rim of light. Don’t overpower it, or the hair and shoulders will blow out.

Step 6: Add a background light (optional)

A background light separates the subject from the background, or creates a bright high-key white. Skip it if you don’t need either.

Step 7: Meter and check

Meter each light separately with a flash or incident meter, then meter all of them together. Without a meter, take test shots and read the histogram. Two more checks:

  • Catchlights should sit at about 10 or 2 o’clock in the eyes.
  • Doubling the distance from a light cuts its light by two stops, so distance is a useful way to adjust power.

For more on readings, see how light is measured.

Common mistakes

  • Turning on all three lights at once. It’s hard to see which light is causing a problem. Build one light at a time.
  • Buying a separate fill light when you don’t need one. A white reflector or foam board works for fill.
  • Treating the 45-degree position as fixed. Rotate the key to suit the face and mood.
  • Overpowering the back light. It can blow out hair and shoulders.
  • Mixing color temperatures. Match the lights or gel them. See color temperature explained.

Safety

Sandbag every stand, especially a stand holding a back light on a boom over the subject. Tape down cables to prevent trips.

The complete guide to lighting fundamentals

Photography Lighting Techniques: How Light Shapes Every Photo
Read the guide

Keep exploring

Guides from other topics

All topics →