What counts as natural and artificial light
Natural light comes from the sun, the sky and the surroundings, without any equipment. Photographers often call it “available light.” It includes direct sun, open shade, overcast skies, window light and moonlight, which is reflected sunlight. Fire and candles are sometimes classed as available light too.
Artificial light is light you add. It falls into two groups. Continuous lights stay on, and include tungsten, halogen, fluorescent, LED and HMI fixtures. Flash fires in a short burst, and includes speedlights, monolights and pack-and-head strobes.
Natural light sources and their color
The table gives approximate values. Color changes with weather, latitude and the atmosphere.
| Source | Approximate color temperature | Character |
|---|---|---|
| Direct midday sun | 5000 to 5500 K | Hard, with strong overhead shadows |
| Overcast sky | 6000 to 7500 K | Very soft, like a huge softbox |
| Open shade | 7000 K and up | Soft and even, but cool and bluish |
| Golden hour | about 2500 to 3500 K | Warm, low-angle light |
| Window light | varies with the sky | Soft, but falls off quickly with distance |
For how these colors behave and how to correct them, see color temperature explained.
Time of day and weather
Golden hour is roughly the hour after sunrise and the hour before sunset. Its length changes with latitude and season. Blue hour is the twilight period when the sun is about 4 to 6 degrees below the horizon, and the ambient light is a deep blue.
Midday sun gives harsh light with overhead shadows. A cloudy day gives soft, even light. Neither is automatically flattering. Harsh midday sun is a common reason outdoor portraits look unflattering, and there are ways to work with bright sunlight.
Artificial light sources
Continuous lights show you what the final image will look like, but they give far less output than flash.
- Tungsten photo lamps are about 3200 K. Household incandescent bulbs are about 2700 K.
- HMI lights are about 5600 K and daylight-balanced. They run hot and use high-voltage ballasts.
- LED panels often have adjustable color. Check the CRI or TLCI rating. A CRI of 95 or higher is a good target.
- Fluorescent lights and cheap LEDs can add green or magenta casts.
Flash is brief but powerful. Electronic flash is roughly 5500 to 6000 K, though this varies by unit and power setting. Its short duration freezes motion. Output is rated in watt-seconds or as a guide number. Most cameras sync flash at 1/160 to 1/250 second. For faster shutter speeds, high-speed sync (HSS) lets flash work at reduced output.
Comparing control, cost and predictability
- Control: Artificial light lets you set the position, power and color. Natural light follows its own schedule.
- Cost: Natural light is free. A reflector or diffuser costs little.
- Predictability: Natural light changes with the sky. Continuous and flash lights give the same result each time you set them.
- Look: Many photographers choose natural light for an organic feel. Studio light gives a more controlled, repeatable look.
When natural light is the better choice
Natural light suits travel, documentary and lifestyle work, and portraits by a window. It is also the best choice on a tight budget. Because the light is part of the scene, you shoot around it. Its quality also changes with the sky, so check hard light vs soft light to judge whether the light you have is hard or soft.
When artificial light is the better choice
Artificial light suits product photography, studio portraits that must look the same each session, and indoor shoots with little ambient light. Flash is the tool for freezing movement. Use artificial light when the sun isn’t available or isn’t suitable. A classic studio portrait is built on three-point lighting.
Mixing natural and artificial light
You can combine the two. A common approach is to use flash to add light to a sunlit subject, or to use a reflector to bounce sunlight into shadows. When flash and ambient light both contribute, set the flash power and the camera exposure separately so that neither overpowers the other. See balancing flash and ambient light.
Watch color too. Sunlight and tungsten lamps have different color temperatures, and mixing them produces color casts. Match the color, or gel the light.
Common misconceptions
- Natural light is not automatically flattering. Midday sun gives harsh overhead shadows.
- Speedlights are not too weak for studio work. They suit small setups, but they recycle more slowly and produce less output than studio monolights.
- You can become a successful photographer without ever using a strobe.
- Not all LEDs are daylight-accurate. CRI varies widely between models.
Safety
Never look directly at the sun through a viewfinder or lens. Tungsten and halogen fixtures get very hot, so keep them away from fabric and don’t touch the bulbs bare-handed. HMI fixtures use high-voltage ballasts.