Short answer: what fluorescent and flood lights do in photography
A photographic floodlight is a broad, wide-beam continuous light, often a bulb in a reflector bowl. Classic photofloods were tungsten bulbs at about 3200–3400K. Fluorescent lights are another continuous option, but they cast a green tint that you have to correct with a magenta filter, a gel or white balance.
Continuous light and where it fits
Continuous light stays on while you shoot. You see the result in real time, which helps when you are learning or working with a model who needs to see the light. It works for video too.
The tradeoff is power. Continuous lights are much weaker than flash. You’ll need a higher ISO, a slower shutter speed, or both. For still photography with fast subjects, flash is usually the stronger choice.
Fluorescent lights for photography
Tubes and CFL softbox kits
Fluorescent sources come in two common forms for photography:
- CFL softbox kits. Spiral CFL bulbs in a softbox, often in budget kits.
- Tube banks. Longer T5 or T8 tubes, such as those in Kino Flo-style fixtures.
Daylight fluorescents are usually about 5000–6500K. Warm-white tubes are around 2700–3000K, so check the color temperature before mixing them with daylight or flash. Not all fluorescents are daylight balanced.
Color quality: CRI and photo-grade tubes
Consumer fluorescents often have a CRI of around 80–90, while photo-grade tubes are usually 90 or higher. The spectrum of a fluorescent tube is discontinuous, with mercury spikes that cause a green cast. A higher CRI reduces the cast but doesn’t remove it.
Correcting the green cast
Two common fixes work well:
- Minus Green gels. Placed on the light, they cut the green so the light is closer to neutral.
- Magenta CC filters. Placed on the lens, they add magenta to cancel the green.
Reading CC filter names
CC filters are named by density and color, with “CC” first. For example, CC30M is 30 units of magenta. The density numbers commonly run 05, 10, 20, 30, 40 and 50. CC30M is a common starting point for cool-white fluorescent light, but test it on your own lights.
Each filter costs light. As a rough guide, CC10 costs about a third of a stop, CC30 about two-thirds, and CC50 about one stop. Check the filter maker’s data before you rely on these figures.
Raw white balance as an alternative
If you shoot raw, you can correct the cast in the white balance tint slider by moving toward magenta. This avoids a filter, but it’s harder to get right by eye, so take a gray card reading first.
Auto white balance often fixes blue and orange casts, but it does not always fix green or magenta tints.
Flicker: magnetic vs electronic ballasts
Magnetic ballasts flicker at twice the mains frequency, which is 100 Hz on 50 Hz mains and 120 Hz on 60 Hz mains. At fast shutter speeds, this can show as banding in the frame.
Electronic ballasts run at tens of kilohertz and avoid visible flicker. If you see banding, check the ballast type, or shoot at a slower shutter speed.
Warm-up time and heat
CFLs take a minute or two, sometimes longer, to reach full brightness and stable color. Let them warm up before you set white balance and exposure.
Fluorescent tubes run much cooler than tungsten. Tungsten photofloods are very hot, though. Keep fabric and diffusion well clear of them.
Mixing continuous light and flash
You can combine continuous light with flash, but balance them on purpose. Flash is brief and usually strong; continuous light is steady and weaker. Set each one separately, check the color of both, and make sure the flash doesn’t swamp the continuous light unless you want that.
Photographic floods vs security floods
Photo floods are continuous studio lights. Security floods are outdoor fixtures designed to light an area, often with motion sensors. They share a name and a wide beam, but they are different products. A photo flood is not a security light, and a security flood is not a studio light.
Common misconceptions
- “Equivalent watts” describe real output. They don’t. CFL “equivalent watts” are incandescent comparisons, not usable photographic output.
- All fluorescents are daylight balanced. Warm-white tubes are around 2700–3000K.
- Auto white balance always fixes fluorescent tint. It usually handles blue and orange, not green and magenta.
Safety
- CFLs and tubes contain mercury. If one breaks, ventilate the room and clean up carefully. Take used bulbs to a recycling point.
- Tungsten photofloods get extremely hot. Keep them clear of fabric and diffusion.
For the broader range of lights, see our best studio lighting kits guide. To learn what “floodlight” means outside photography, read what is the purpose of a floodlight and whether floodlights can have cameras. For a first setup using a modeling light to preview shadows, see how to set up photography lights for beginners.