Short answer
Light what the object reflects, not the object itself. A shiny surface mirrors whatever is around it, so the goal is a large, soft light source placed where it reflects into the camera. Shape the edges with white cards and black flags, and cut the camera’s own reflection with angle, flags or polarization.
Why reflective objects are hard to light
A glossy object acts like a mirror, so the picture is mostly what it reflects. A small, bare flash gives a hot spot, not detail. A large, diffuse source gives a smooth gradient that shows the shape. The camera’s reflection is also in the frame, so you have to plan your position as carefully as the lights.
Angle of incidence equals angle of reflection. Move the source, and the reflection moves with it.
Use large, soft sources
Use a big softbox, a scrim or a diffusion panel for smooth gradient reflections. Feather the source, or add a gradient, to avoid flat or blown highlights. Very large sources, such as 4 by 6 ft scrims, are common for big reflective products, because they give clean reflections across a wide surface.
Shape edges with white cards and black flags
- White cards add bright edges, which define shape on glossy items.
- Black flags add dark edges, which also define shape. A black reflection on metal or glass is not a mistake. It shows the outline.
Use both to decide which edges glow and which stay dark.
Light tents for small shiny items
Small chrome and jewelry items can be surrounded by a light tent, which gives even white light around the object. Tents are simple to use, and they keep the reflections soft.
Glass and bottles: bright-field and dark-field
Two common approaches work for glass, covered in more depth in lighting glassware:
- Bright-field. Diffuse light behind the glass gives black edge lines, which read as clean outlines.
- Dark-field. A black background with lights behind and to the sides gives bright edge lines.
Strip boxes create clean vertical line highlights on bottles and cylinders, which often suits dark-field work.
Polarizers and cross-polarization
A polarizer cuts reflections from non-metallic surfaces, such as glass and water. It works best near Brewster’s angle, roughly 53 degrees for water and 56 degrees for glass.
A polarizer barely reduces reflections from bare metal. For glossy metal, use a different approach, such as diffuse sources, flags, or dulling spray.
Cross-polarization uses a polarizing gel on the lights and a polarizer on the lens. It removes most specular glare from non-metal surfaces.
Hide the camera’s reflection
The camera or your own reflection can show up in the object. To hide it:
- Use a longer lens and move farther back.
- Offset the camera angle.
- Use a black card with a lens hole.
- Drape black fabric over the tripod.
Dulling spray for metal
Dulling spray can temporarily matte a metal surface. Use it in a ventilated area, and test it on a hidden spot first. Some sprays affect the finish, so check before you spray the whole product.
Depth of field and compositing
Product work often shoots at around f/8 to f/16 on a tripod. If depth of field falls short, focus stack several frames. For complex reflective products, compositing several exposures, each lighting a different area, is a standard technique.
Reflections in water or glass (landscape and phone)
If you mean reflections in a lake, puddle or window rather than a product, the approach is different:
- Choose the surface. Calm lakes, rivers, puddles, glass storefronts and wet pavement all make good reflectors.
- Shoot low. Get the camera close to the surface. On a phone, flipping it upside down can lower the lens. A low tripod keeps the frame steady.
- Lock focus. Tap and hold on the main subject so autofocus doesn’t latch onto the glass or water.
- Choose aperture. A small aperture such as f/8 to f/11 keeps both the reflection and the scene sharp. A wider aperture blurs a hand-held mirror.
- Center the horizon. Placing the horizon in the middle makes a symmetrical mirror image.
- Watch the wind. Ripples break a reflection. Early morning or dusk is usually calmest.
Common mistakes
- Using a small, bare flash. It creates a hot spot, not detail.
- Expecting more light to help. Source size and position matter more than power.
- Assuming a polarizer removes all reflections. It doesn’t work well on bare metal.
- Treating black reflections as errors. They often define shape.
Safety
Use dulling spray in a ventilated area and test it on a hidden spot first.
Where to go next
For a reflector to add fill or bounce light onto a metal product, see how to use a silver light reflector. Grids help control spill and reflections on softboxes, covered in honeycomb grids for softboxes. For shape choices on glossy products, see octabox vs rectangular softbox. For a broader checklist of reflection fixes, including shooting through glass, see how to avoid reflections in photography.