Jewelry needs two kinds of light. Polished metal looks best under large, soft sources that reflect as smooth gradients. Gemstones sparkle under small, hard points of light. A good jewelry setup combines both, then controls what each piece reflects so the hot spots stay off the metal.
Why stones and metal need different light
A gemstone’s brilliance and fire come from small, hard points of light reflecting inside the stone. Under purely diffuse light, a diamond looks dull and glassy. Polished metal is the opposite: it reflects its surroundings, so it looks best when those surroundings are large, even, and soft.
Soft light for metal
Use large sources for metal, such as a softbox or a diffusion dome. White fill cards add brightness to polished surfaces. Black cards add contrast and define the edges of shiny pieces, which otherwise can blend into the background.
Hard points for sparkle
Add one or two small, hard sources for the stones. Bare LEDs, fiber-optic lights, a bare speedlight, or a pin spot all work. Place them so they strike the stones and do not reflect into the lens. Sparkle from a point source shows up as bright flashes across the facets, which is the effect you want.
Fix hotspots
A hotspot is a small, bright reflection that draws the eye away from the piece. Fix it by one or more of these steps:
- Diffuse the source so it is larger.
- Move the source farther from the piece.
- Feather the source, angling its edge toward the piece.
- Change its angle so the reflection misses the lens.
Test each change with a frame. Small changes in position often remove a hotspot completely.
Metal and reflective surroundings
Metal reflects everything around it, including you and the camera. A tent or a diffusion dome gives a clean, even reflection that looks intentional. Plain walls and furniture show up in polished metal and make it look busy.
Camera and lens
A 90 to 105 mm macro lens is typical for jewelry, and 100 mm is common. A longer working distance keeps the camera out of reflections on the piece. Shoot at about f/8 to f/11. Past about f/16, diffraction softens detail, so for very small pieces where depth is limited, focus stacking is a better choice than stopping down further.
Focus stacking
Focus stacking is standard for rings and earrings. Take a series of frames with the focus point moved in small steps, usually 10 to 50 or more frames, then blend them in software. Keep the camera and the piece completely still between frames.
Color and white balance
Use daylight-balanced lights with a CRI of 95 or higher, and set a custom white balance from a gray card. Gold and silver shift easily with poor white balance, so check the color against the physical piece. A polarizer barely reduces reflections from metal under normal light, so do not rely on one to fix a hotspot on metal.
Mounting and cleaning
Rings and earrings need supports. Museum wax, putty, or a clear acrylic stand holds a piece without showing the support. Hide what remains in post. Clean the piece with a microfiber cloth and blow off dust with a blower. Wear gloves so fingerprints do not appear on the metal or the stones.
Common mistakes
- Soft-only light kills the sparkle of gemstones. You need some hard points.
- Small apertures such as f/22 lose detail to diffraction. Stack the focus instead.
- A light box alone gives clean metal but rarely good stone sparkle.
- Lighting jewelry is about controlling what the piece reflects more than about raw brightness.
Safety
Handle valuable pieces over a padded surface. Drops can cause damage and loss, and small stones can be lost on hard floors.
For the wider approach to reflections, see how to avoid reflections in photography. For a more general look at shadow control, see shadow control for product photos.