Product and Food Lighting

Flat Lay Photography Lighting: Overhead Setups for Tabletop Layouts

Flat lay photography lighting with an overhead camera, side window or softbox light, fill cards, matte backgrounds, and controlled glare on tabletop layouts.

On this page
  1. Get the camera square to the surface
  2. Choose the light direction
  3. Soft or hard light
  4. Fill and shadow
  5. Backgrounds
  6. Glare on reflective items
  7. Apertures and focal length
  8. Framing and consistency
  9. Common mistakes
  10. Safety

A flat lay needs even, readable light with shadows that add depth rather than clutter the layout. The classic setup puts a soft light, or a window, at the 9 or 3 o’clock edge of the frame, with a white fill card on the opposite side. Keep the camera square to the table, and keep yourself and your light stands out of the frame.

Get the camera square to the surface

Use a bubble level or the camera’s in-camera level to check that the sensor is parallel to the table. A tilted camera stretches the layout and makes some items look larger than others. Mount the camera on a tripod with a horizontal arm, a C-stand with a boom, or a dedicated overhead rig.

Choose the light direction

Side light from the 9 or 3 o’clock position gives the most depth. It shows the edges of objects and the texture of fabric. A light placed at the top edge of the frame, at 12 o’clock, pushes shadows toward the viewer, which works like backlight and can look dramatic. Both directions work, so choose by the look you want.

Keep the light away from the spot where you or the camera stand. You will cast shadows across the layout if you stand between the light and the table.

Soft or hard light

A large softbox or a diffused window gives soft shadows that keep the layout readable. A bare strobe or direct sun gives graphic, hard shadows that suit bold styles. Gobos, or leaves held in front of a hard light, add patterned shadows if you want that effect.

Fill and shadow

Place a white fill card on the side opposite the main light to open the shadows. Keep some shadow so the objects look three-dimensional. A flat lay with no shadow at all can look like a drawing.

Backgrounds

Matte boards, vinyl backdrops, linen, wood, and marble-effect surfaces all work. Matte surfaces reduce glare, which matters most when the items on the layout are shiny. Choose a background that supports the products rather than competing with them.

Glare on reflective items

Mirrored sunglasses, glossy packaging, and shiny metal are the hard cases. Use a large, soft source and move it until the reflection misses the lens. Often a small change in angle is enough. If the reflection still shows, check your own position, since the camera or a dark area can appear in the shine. For more on this, see how to avoid reflections in photography.

Apertures and focal length

For a flat layout, f/5.6 to f/8 usually keeps everything in focus. For tall props, step up to about f/11. Use a focal length of about 35 to 70 mm (full-frame equivalent). Wide lenses stretch the edges of the frame and distort props near the corners.

Framing and consistency

A tethered computer or a flip-out screen helps when the camera points straight down, because you can check framing without leaning over the layout. When you shoot a series, lock the exposure and the positions of the lights and props so every image matches.

Use a custom white balance from a gray card. Avoid mixing room light with window light, which gives each part of the frame a different color.

Common mistakes

  • Lighting straight down is not required. Side light usually gives better depth.
  • Ring lights flatten the layout and reflect on glossy items.
  • Shallow depth of field is rarely wanted in a flat lay. Most flat lays need everything sharp.
  • Shadows are not always bad. Soft directional shadows add depth.

Safety

Counterweight the booms, and sandbag the stands. A falling camera or rig can hurt people and break products. Do not place a heavy rig directly over anyone’s head.

For the soft-light side of this setup, see shadow control for product photos. For clothing laid flat, see lighting clothing and fabric texture.

The complete guide to product and food lighting

Product Photography Lighting: Advanced Techniques for Catalog-Quality Shots
Read the guide

Keep exploring

Guides from other topics

All topics →