A gobo is a cutout or patterned plate that shapes light into shadows or patterns, such as window panes, blinds or foliage. You can hold a free-standing cutout between the light and the subject, or place a patterned plate in a projector attachment on a spot-style light. Either way, the pattern’s sharpness depends on how far the cutout is from the subject and the light.
Gobo, cucoloris and flag
These terms are not interchangeable:
- Gobo: a patterned plate that shapes light. It can sit in a projector or be held as a cutout.
- Cucoloris (“cookie”): a free-standing cutout with a random pattern, such as leaves or irregular holes.
- Flag: a solid panel that blocks light without any pattern.
Free-standing cutouts vs projection gobos
- Free-standing cutouts sit between the light and the subject. They work only with hard light, such as a bare bulb, a fresnel or a small reflector. Soft light blurs the pattern away. For why hard and soft light differ, see sources of light in photography.
- Projection gobos sit at the focal plane of an optical spot or projector. The projector lens focuses the pattern, and zoom or distance sets its size. Optical snoots and spot attachments exist for speedlights, strobes and LEDs, from brands such as Godox, Westcott and Aputure.
Materials
- Stainless steel: durable and heat resistant.
- Glass: fine detail, and it can carry full-color images.
- Card or foam board: cheap and easy to cut, but it can char in hot light. See Safety.
Gobo sizes and holders
Projection gobos come in lettered sizes, from A to E. Each size fits specific holders, so check your projector’s gobo holder specification before you buy.
Sharpness: distance from the subject and the light
- To make the pattern sharper, place the cutout close to the subject and farther from the light.
- To soften it, move the cutout nearer the light.
The window effect
To mimic sunlight through a window, place the light 3–5 m (about 10–16 ft) or more from the subject, so the beams are close to parallel, like sunlight. Put a window-frame cutout or blinds close to the subject. The shadows then look like light through a real window.
Common patterns
Window panes, venetian blinds, foliage, lace, noir stripes, and textures for backgrounds are all common patterns.
Focus, previewing and projector inversion
- Previewing focus needs continuous light or a strobe’s modeling lamp.
- A projector lens inverts the image. Insert the gobo upside down and reversed to get the pattern the right way up.
Exposure for patterned light
Meter the lit parts of the pattern, not the shadows. Patterned light has strong contrast, which suits manual exposure. Slight underexposure keeps the highlights clean.
Adding color
Place gels in front of the gobo to add color to the pattern. Glass gobos can carry full-color images. See colored gels for photography lights.
Common mistakes
- Thinking gobo, cookie and flag mean the same thing. Each has a different job.
- Using soft light with cutouts. It blurs the pattern away.
- Assuming cardboard is fine in any light. It chars in hot projectors.
- Expecting projected patterns to come out the right way up. The lens inverts them.
Safety
- Keep DIY card and foam away from tungsten and modeling lamps. They can scorch or ignite.
- Metal gobos get hot in tungsten projectors. Handle them with gloves.