Creative Lighting

Silhouette Lighting: Exposing for the Background and Lighting Behind Your Subject

Silhouette lighting: expose for a lit background, keep the subject unlit, and use studio strobes, a backlit scrim or sunlight, with clear outlines.

On this page
  1. How the exposure works
  2. Studio setup with background lights
  3. Alternative: a backlit scrim
  4. Starting settings
  5. Outdoor silhouettes
  6. Posing for a clear outline
  7. Optional rim light
  8. Focus
  9. Camera settings that lift shadows
  10. Common mistakes
  11. Safety

Expose for the background and put no light on the subject. The subject then falls into shadow and reads as a shape. You can do this in a studio with lights aimed at the background, with a backlit scrim, or outdoors against a bright sky.

How the exposure works

The camera meters the bright background, so the subject goes dark. As a rough guide, a subject about five or more stops darker than the background reads as near black. About three to four stops darker keeps some faint detail. The background should be bright and close to clipping. Check it with a spot meter or the histogram.

Studio setup with background lights

  1. Light a white seamless backdrop or a plain wall with one or two strobes. Aim the lights at the background only.
  2. Place the subject 2–3 m (6–10 ft) in front of the background, so the bounce light does not reach them.
  3. Flag the background lights so they do not spill onto the subject or flare into the lens.
  4. Add no fill light to the subject. Fill light spoils the shape.

Alternative: a backlit scrim

Light a translucent scrim or diffusion panel from behind. The panel glows, and the subject stands in front of it with no light on their front. This gives a clean, even background.

Starting settings

Use manual mode with these starting values, then adjust:

  • ISO 100
  • f/8
  • Shutter speed of 1/125–1/200 s, within your flash sync speed

Adjust the power of the background lights rather than the subject.

Outdoor silhouettes

Put the sun or a bright sky behind the subject. Spot-meter the sky, lock the exposure with AE-L, and turn the flash off.

Posing for a clear outline

  • Use profile poses.
  • Leave clear gaps between the limbs and the body.
  • Choose poses with distinct outlines. Front-on, overlapping poses lose the shape.
  • Hair, props and loose fabric add recognizable edge detail.

Optional rim light

A thin rim light from behind can trace the edges without filling in the front. Treat this as an optional variation.

Focus

Autofocus on the subject’s edge, where contrast is highest, or prefocus manually. A dark subject against a bright background can be hard for autofocus to lock onto.

Camera settings that lift shadows

Turn off Active D-Lighting, Auto Lighting Optimizer, DRO and HDR, because they lift shadows and weaken the silhouette. Shoot RAW, and deepen the blacks with levels or curves in post.

Common mistakes

  • Thinking silhouettes need a sunset. A lit studio background works just as well.
  • Expecting matrix or evaluative metering to get it right. It brightens the subject. Spot-meter the background instead.
  • Adding some fill to the subject. Fill spoils the shape.
  • Assuming any pose works. Front-on, overlapping poses lose the outline.
  • Believing the background must be blown out. Slight color or texture is fine, as long as the subject stays black.

Safety

Never look at the sun through an optical viewfinder, and don’t aim a lens at the sun. It can damage your eyes and the camera’s sensor.

The complete guide to creative lighting

Smoke and Fog Photography Lighting
Read the guide

Keep exploring

Guides from other topics

All topics →