Creative Lighting

UV Light Sources for Photography

UV light sources for photography: 365 nm versus 395 nm torches, blacklight tubes, and fluorescence and reflected UV setups with camera settings.

On this page
  1. Two techniques: fluorescence and reflected UV
  2. Choosing a UV source
  3. How to take a picture of UV light
  4. Reflected UV setup
  5. Subjects that glow
  6. Common mistakes
  7. Safety

UV photography captures ultraviolet light or the visible glow that UV light causes. There are two main approaches. In fluorescence, a UV source makes a subject glow in visible color, which an ordinary camera can record. In reflected UV, the camera records the UV light itself, which needs a camera and lens that pass UV. Most people start with fluorescence.

Two techniques: fluorescence and reflected UV

Fluorescence needs a UV source, a dark room and a standard camera. Put a UV-blocking filter on the lens, such as a Wratten 2E type, so only the visible glow reaches the sensor. You do not need a modified camera for this. The result is visible light, not UV.

Reflected UV needs a camera that can record UV, usually one with a full-spectrum conversion. Add a UV-pass filter, such as a Baader U-type filter that passes roughly 320–380 nm, and a lens that transmits UV. Ordinary glass blocks most UV below about 350 nm.

Choosing a UV source

  • 365 nm LED torches produce stronger fluorescence with less visible violet light than 395 nm.
  • 395 nm LEDs are cheaper, but they leak violet light that tints the scene.
  • Good 365 nm torches use a Wood’s glass filter (a ZWB2-type filter) to block visible light.
  • Blacklight-blue (BLB) tubes peak around 365–370 nm. LED blacklight bars suit body-paint shoots.
  • Xenon flash emits some UV, though many flash tubes are UV-coated. Check the specific model.
  • Shortwave UV (about 254 nm) makes some minerals fluoresce. It is hazardous to skin and eyes; see Safety.

How to take a picture of UV light

For a glowing subject, use a 365 nm source in a dark room, a UV-blocking filter on the lens, and a tripod. Set the camera to manual.

  • Use ISO 400–1600.
  • Expect exposures of roughly 1–30 seconds, depending on how powerful your source is.
  • Set a fixed daylight white balance. Auto white balance shifts the glow colors.
  • Shoot RAW so you can adjust the color in post.

Take a test shot and adjust from there.

Reflected UV setup

Reflected UV is a bigger commitment. You will need:

  • A full-spectrum modified camera.
  • A UV-pass filter on the front of the lens.
  • A lens that transmits UV. Most modern lenses block it. Some older lenses and specialist lenses made with quartz or fluorite transmit it, such as the Nikon UV-Nikkor 105 mm f/4.5 or the Coastal Optics 60 mm.
  • Strong sunlight, which is the most reliable UV source outdoors. Indoors, you need a dedicated UV source.
  • A tripod, because exposures are long.

Some UV-capable lenses focus differently in UV than in visible light, so check focus with the UV filter fitted if you can. For what UV cameras are used for beyond photography, see what is a UV camera used for.

Subjects that glow

Many things fluoresce under UV, including:

  • UV body paint (use skin-safe paint only)
  • Highlighters
  • Tonic water, which glows blue
  • Some scorpions and minerals
  • Security features on banknotes

Common mistakes

  • Treating 365 nm and 395 nm as interchangeable. 395 nm gives weaker fluorescence and a violet cast.
  • Thinking a UV filter on the lens enables UV photography. A standard UV filter blocks UV. A UV-pass filter is a different tool.
  • Assuming fluorescence needs a modified camera. Only reflected UV does.
  • Assuming blacklights are harmless. UV-A can still strain the eyes at close range.

Safety

  • Never look into UV LEDs. Wear UV-blocking glasses when you work close to them.
  • UV-C (254 nm) germicidal lamps can burn skin and eyes within minutes. Keep them out of the frame and away from people.
  • Use only skin-safe UV paint on models.
  • When a UV-pass filter is on the lens, never look through it or put your eye to the viewfinder. It can damage your eye.

The complete guide to creative lighting

Smoke and Fog Photography Lighting
Read the guide

Keep exploring

Guides from other topics

All topics →