Creative Lighting

Light Painting Photography Tutorial (Nikon Settings Included)

Light painting step by step with Nikon settings: Manual mode, Bulb or Time, manual focus, a remote release and the light sources to paint with.

On this page
  1. What you need
  2. Nikon settings to start with
  3. Bulb and Time on Nikon bodies
  4. Find your base exposure
  5. Focus in the dark
  6. The three techniques
  7. Light sources and gels
  8. Painting tips
  9. Post-processing
  10. Common mistakes
  11. Safety

Light painting is a long-exposure technique. The shutter stays open while you move a light through the scene, or while you light an object in the frame, so the moving light records as trails or as a glow. It works best in a dark location. On a Nikon, start in Manual mode, use a shutter speed of 10–30 seconds or Bulb or Time for longer exposures, and focus manually.

What you need

  • A camera with Manual mode and Bulb or Time for exposures over 30 seconds.
  • A sturdy tripod. Kinetic light painting, where you move the camera, does not need one.
  • A remote release: a cable release (such as the Nikon MC-DC2), a wireless remote, or the 2-second self-timer for shorter exposures.
  • A timer or stopwatch for timing Bulb exposures.
  • Light sources (see below).
  • Dark clothing.

Nikon settings to start with

  • Mode: Manual (M).
  • Shutter speed: 10–30 seconds. For longer exposures, use Bulb or Time.
  • ISO: 100–200, kept as low as practical. Some higher-end bodies, such as the D810, D850 and Z7, have a base ISO of 64, so check yours.
  • Aperture: f/8–f/11 to start. Stop down if the light trails are too bright.
  • White balance: a fixed setting, such as 3200–5600 K. Shoot RAW (NEF on Nikon).
  • Vibration reduction (VR): turn it off when the camera is on a tripod.
  • Long Exposure NR: after each exposure, the camera takes a dark frame of the same length to reduce noise. That doubles the wait. Turning it off speeds things up, but hot pixels may be more visible.

Bulb and Time on Nikon bodies

  • Bulb: the shutter stays open for as long as you hold the release. On most bodies, turn the shutter speed dial past 30 seconds to reach Bulb.
  • Time: press once to open the shutter and again to close it, so you do not have to hold the release. On some entry-level models, Time needs a remote.
  • On Z-series bodies, Bulb and Time are available past 30 seconds in M mode.

The exact setting varies by model, so check your manual.

Find your base exposure

Before you add any light, find the exposure for the ambient scene so you know how dark the background will be. One quick method is:

  1. Set a high ISO, such as ISO 6400, and find a shutter speed that gives a slightly underexposed, ambient-only frame.
  2. Note the shutter speed in seconds.
  3. Set the ISO back to 100. Each stop of ISO doubles the exposure time, so the six-stop change from ISO 6400 to ISO 100 means 64 times as long. For example, 1 second at ISO 6400 becomes about 64 seconds at ISO 100.

Treat the result as a starting point, then check the first frame.

Focus in the dark

Autofocus rarely works in the dark. Switch the lens to manual focus. Shine a flashlight on the spot you want sharp, lock focus, and then switch the flashlight off before you start the exposure.

The three techniques

  • On-camera light painting: the camera stays still and the light moves through the frame. This makes the trails most people picture.
  • Off-camera light painting: the light stays out of the frame and lights an object, such as a building or a sculpture. You can combine this with smoke for atmosphere; see smoke and fog photography lighting.
  • Kinetic light painting: the camera moves during the exposure. You might twist the camera or move it closer to or farther from a light.

Light sources and gels

Flashlights and torches, glow sticks, sparklers, LED wands, a DIY tube light, EL wire, car headlights and tail lights all work. Moonlight counts too. Candles work but need care (see Safety).

Gels are optional. They change the color of your light sources. For how gels work, see colored gels for photography lights.

Painting tips

  • Wear dark clothing and keep moving. Moving people in dark clothing usually don’t register in the frame, but a person who stands still will show.
  • Don’t stand between the light and the lens, and don’t point the light straight into the lens, or a bright blob can appear.
  • Paint in strokes, the way you would with a brush.
  • Use different angles, and mix colors and intensities for more depth.
  • Ask an assistant to start and stop the exposure while you move.
  • Surfaces matter. Some absorb light and others reflect it, which changes how a light stroke looks.

Post-processing

Apply your usual crop, color and contrast edits. Long exposures can look grainy, so a noise reduction pass helps. Don’t overdo it, or the image can look plastic.

Common mistakes

  • Using a high ISO in the dark. Low ISO keeps noise and blown trails down.
  • Expecting autofocus to work during the shot. Lock focus, then switch to manual.
  • Expecting the painter to show up. They only appear if they are lit or standing still.
  • Treating Bulb and Time as the same. Time does not require holding the release.

Safety

  • Steel wool needs eye protection, gloves and a hat. Work on a non-flammable surface, with water or an extinguisher nearby. Burning steel wool can ignite nearby material.
  • Scout the location in daylight, and watch your footing in the dark.
  • Pick locations where you can stand safely. Never stand in a traffic lane.

The complete guide to creative lighting

Smoke and Fog Photography Lighting
Read the guide

Keep exploring

Guides from other topics

All topics →