A chroma key, whether green or blue, works when software can separate the subject from an evenly colored background. To get a clean key, light the screen and the subject separately so you can control each one. Keep the screen even, keep the subject away from it, and keep spill off the subject.
Light the screen and the subject separately
If one light has to cover both the subject and the screen, you lose control of both. Give the screen its own lights, and light the subject with lights aimed at the subject.
Two targets help:
- Evenness: the screen should vary by about 1/3 stop or less across the frame.
- Level: the screen should be about the same brightness as the subject’s key light, or up to about 1 stop darker. Approaches vary.
To check evenness, take light meter readings at several points on the screen, use a false-color or zebra display, or look for a narrow spike in the histogram.
Lighting the screen
Two broad, soft sources placed about 45° from each side of the screen give even light. LED panels, fluorescent banks or overhead strips also work. Avoid hot spots and shadows on the screen. Shadows create uneven, dirty mattes.
Keep the subject away from the screen
Stand the subject at least 2–3 m (6–10 ft) in front of the screen. Closer than that, the screen spills color onto the subject, and the subject’s own shadow falls onto the screen.
Key, fill and rim: the three-point setup
People often ask about the “3 lighting rule”. The usual starting point is three-point lighting: a key light, a fill light to soften shadows, and a back or rim light. With a screen, the rim or hair light matters most. It helps the edges of the subject separate from the screen and works against green spill on hair.
Match the subject’s lighting to the background plate you will composite into. Direction, hardness and color temperature should agree. If the plate has hard sunlight from the left, the subject’s key should look like it too.
Green or blue?
Green is the default for most work. Camera sensors have twice as many green-sensitive photosites as red or blue ones, so a green screen keys well with less light. Blue is the better choice for blond hair, green wardrobe and green props. Green wardrobe and props would key out on a green screen.
Screen material and wrinkles
Pull the fabric tight, or steam it. Wrinkles create uneven tones. A painted wall or a tensioned pop-up screen gives the most even color. Avoid shiny or reflective screens.
Camera settings and matching the plate
- Use a low ISO, and shoot RAW if you can. Noise breaks up the edges of the matte.
- Don’t overexpose the screen. Overexposure desaturates the color and adds spill.
- Expose the screen so it is saturated but not clipped. Check the histogram.
What keys badly
- Shiny, reflective, sheer or screen-colored wardrobe
- Fine hair and motion blur, which are the hardest details to key
- Floors. Light them separately, or frame the shot so the floor is out of view.
Common mistakes
- A brighter screen keys better. Overexposure desaturates the color and adds spill.
- One big light can cover both the subject and the screen. You lose control of both.
- Standing close to the screen is fine. Spill and shadows both increase.
- Any green fabric works. You need saturated, matte chroma green or blue.
- Shadows on the screen will key out. They make uneven, dirty mattes.
Safety
Sandbag your light stands, and tape cables down around the set so nobody trips over them.