What light does to a photograph
Photography means “drawing with light.” The word comes from the Greek phōs (light) and graphē (drawing). A camera records only the light that reaches its sensor or film, so the way light falls on a subject decides how that subject looks in the final picture. Exposure, color, texture and mood all depend on it.
Light is not only a matter of brightness. Two scenes with the same brightness can look completely different if the light comes from another direction or has a different quality.
The four properties you control
Most lighting decisions come down to four properties:
- Intensity: how bright the light is. You change it with light power, distance, or your aperture and shutter speed.
- Quality: how hard or soft the light looks. This depends on the size of the light source relative to the subject. See hard light vs soft light.
- Direction: where the light comes from, such as the front, side, back or above.
- Color: the color temperature, measured in kelvin. See color temperature explained.
Changing one property usually changes the others. Moving a light closer makes it brighter and softer at the same time.
Natural and artificial light
Natural light comes from the sun, the sky and the surroundings. It includes direct sun, open shade, overcast skies, window light and moonlight. Artificial light is anything you add, such as continuous lights (LED, tungsten or fluorescent) or flash (speedlights and studio strobes).
Natural light is free and is often the best place to start. Its main drawback is that you can’t control it: the sun moves, and clouds change the light within minutes. Artificial light gives you control over position and power, and flash can freeze motion. Neither is better in general. For a fuller comparison, read natural vs artificial light sources.
Hard and soft light
Hard light has a small source compared with the subject. It makes crisp shadows with abrupt edges and strong contrast, and it brings out texture. Midday sun is hard light, because the sun is huge but covers only about half a degree of sky.
Soft light comes from a large or diffused source, such as an overcast sky, a window, a softbox or a bounced flash. Its shadows have gradual edges, and it smooths texture. Soft light does not automatically mean low contrast. Contrast is set separately, by the fill light and the lighting ratio.
Direction: front, side and back
- Front light comes from the camera’s side. It gives even illumination with few shadows, but it flattens texture. It suits beauty work and simple portraits and is weak for landscapes and products.
- Side light, at about 90 degrees to the camera, shows texture and form. It is common for portraits, products and landscapes.
- Back light outlines the subject with a rim of light, or silhouettes it, depending on exposure.
- Light from above is common in portraits when the key light sits slightly above eye level. Harsh overhead midday sun, however, creates deep shadows around the eyes.
Color temperature and white balance
Color temperature describes how warm or cool a light looks, measured in kelvin (K). Low values are warm and orange, such as a 2700 K household bulb or a 3200 K studio tungsten lamp. High values are cool and blue, such as open shade at 7000 K and above. Daylight and electronic flash sit around 5500 K.
Problems arise when sources differ. A tungsten lamp mixed with window daylight creates color casts. Set your camera’s white balance to match the main light, or gel the lights so they match. The color temperature guide covers the details.
Exposure, distance and light ratios
Differences in light are usually described in stops. Each stop doubles or halves the amount of light. Distance matters too. Under the inverse square law, doubling the distance from a light cuts its intensity to a quarter, a loss of two stops.
A lighting ratio compares the bright side of the subject with the shadow side. A ratio of 2:1 is one stop of difference, and 4:1 is two stops. For meter readings, see how light is measured. For ratio examples, see lighting ratios.
A three-light setup
A classic studio portrait uses three lights. The key light is the main source. A fill light on the other side softens the shadows. A back light behind the subject separates them from the background. The key light is the primary light. Learn the roles in three-point lighting, then follow how to set up a three-point lighting system step by step.
Lighting indoors
Indoors, the most useful free light is usually a window. Turn the subject sideways to the window instead of shooting toward it, which often silhouettes the subject. Put a white card or reflector on the far side to lift the shadows.
Flash works well indoors when you bounce it off a white ceiling or wall. This gives softer light than aiming it straight at the subject, though a colored surface can tint the bounce. Direct on-camera flash is flat and harsh.
Mixed indoor lights are a common problem. A room lit by tungsten lamps and window daylight shows color casts. Switch off the lamps you don’t need, or set white balance to one source and gel the other.
A practical order to learn
You don’t need a full studio to learn lighting. A sensible progression is:
- Window light and open shade.
- A white reflector to fill shadows.
- Bounce flash or one softened light.
- Two lights: key and fill.
- Three lights, adding a back light.
Add one light at a time. Setting up everything at once makes it hard to see which light is causing a problem.
Where to go next
- Three-point lighting explains the roles of the key, fill and back light.
- Natural vs artificial light sources covers the sources you can use.
- Hard light vs soft light covers controlling shadow edges.
- What is good lighting for a picture? matches light to subject.
- Why is light very important? gives the case behind these choices.
- How light is measured covers meters and stops.
- Lighting ratios covers the balance between lit and shadow sides.
- Color temperature explained covers warm and cool light.
- How to set up a three-point lighting system gives a step-by-step setup.