Yes. You can take a black background photo in camera without a black backdrop, as long as the subject is lit and the background gets little or no light. Set the camera so the ambient light is dark, put the background well away from the light, and light only the subject with a flash or lamp. A black backdrop helps, but it is optional.
Why it works
A background goes black when it receives much less light than the subject. Light falls off with distance, so keeping the background far from the light is the first step. When you light only the subject, the background stays dark.
Step by step
- Put the background far from the light. Place the background at least two to three times as far from the light as the subject is. The farther it sits, the darker it goes.
- Set manual mode. Use the base ISO (often 100), and a shutter speed at or below your flash sync speed. About 1/200 s is a common starting point. Start at f/8.
- Take a test frame with no flash. The background should be black or close to it. If it is not, darken the room until it is.
- Add one light close to the subject, from the side. The light should fall off before it reaches the background.
- Control spill. Use a grid, snoot, barn doors, or a black card to keep the light off the background.
- Adjust the light’s power, not ISO. Raising ISO brightens the background too.
- Check the histogram. The background should sit at the far left, and the subject should not clip.
- Deepen what is left in post. Levels or Curves can darken a background that is nearly black but not quite.
Turn off HDR
Turn off your camera’s HDR mode. HDR tries to brighten dark areas, which lifts the background you are trying to keep black.
At home
You do not need a studio. A dark room, a black sheet, velvet, or a dark T-shirt will do, along with a speedlight or a desk lamp. If you use a lamp or LED, turn off every other light. With continuous light, shutter speed cannot remove the room light.
Outdoors
In daylight, flash with high-speed sync (HSS), or a fast sync speed with a small aperture, can darken the background. HSS lets the shutter run faster than the normal sync speed, but it cuts flash output noticeably, so you need more power or a closer light. How well this works depends on how strong the sun is.
On a phone
Tap the lit subject on the screen to set focus and exposure there. Then lower the exposure compensation until the background goes dark. Many phones also let you turn HDR off in the camera settings.
Fix it in post
If you shot against a normal background, you can make it black afterward. Photo editors can select the subject and fill the background with black, and AI background tools can do this quickly. Check the edges at 100% for halos or missing hair. Levels or Curves can deepen a background that is nearly black but not quite.
Common mistakes
- Auto exposure overexposes black scenes, because the camera tries to make the scene a mid-tone.
- Raising ISO lifts the background too.
- Light from behind the camera washes out the background. Light from the side keeps it dark.
- Spill from a poorly placed modifier makes even a black sheet look gray.
Safety
In a dark room, tape down cables and sandbag stands so no one trips over them.
For the lighting theory and the aperture choice, see black background photography: lighting and camera settings.