Lighting Gear

Honeycomb Grids for Softboxes: What They Do and When to Use Them

Honeycomb grids for softboxes narrow the beam and cut spill without making light harder. Learn grid angles, when to use one, and how grids affect exposure.

On this page
  1. Short answer: a grid narrows the beam and cuts spill
  2. What a softbox grid is
  3. Grid angles and cell depth
  4. What a grid does and doesn’t do
  5. When to use a grid
  6. When to skip a grid
  7. Light loss and exposure
  8. Choosing a grid for your softbox
  9. Tips for using a grid
  10. Common misconceptions
  11. Safety

Short answer: a grid narrows the beam and cuts spill

A honeycomb grid is a fabric or metal grid that attaches to the front of a softbox or reflector. It narrows the beam and cuts spill to the sides. It doesn’t change the softness of the light on the subject, because the source size stays the same.

Use one when you need to keep light off the background, darken a backdrop, or control where the light falls in a small room.

What a softbox grid is

A softbox grid is a fabric honeycomb, sometimes called an egg crate, that attaches to the front of the box, usually with Velcro. The cells act like directional tunnels. Instead of light spreading in every direction, the grid forces it forward along a narrower path.

Think of it as blinders for the light. It keeps light from spilling sideways where you don’t want it.

Grid angles and cell depth

Grids are described by their beam angle. Fabric softbox grids are commonly around 40 to 50 degrees, and tighter 30-degree versions exist, though the exact angles vary by brand.

Metal grids for reflectors and beauty dishes come in 10, 20, 30 and 40 degrees. A smaller number means a narrower beam.

Cell depth and width set the angle. Deeper or narrower cells produce a tighter beam. Check the grid’s angle before you buy, because two grids with similar looks can have very different beams.

What a grid does and doesn’t do

A grid does:

  • Narrow the beam, so less light reaches the walls and the background
  • Cut spill, which helps with low-key portraits and controlled rim lights
  • Create a soft-edged pool of light that falls off toward its edges, a natural vignette
  • Reduce lens flare from rim lights aimed at the lens

A grid doesn’t:

  • Make the light harder. The source size is unchanged.
  • Act as a snoot, which gives a tight, sharp-edged spot. A grid gives a soft-edged pool.
  • Work like a flag. A flag blocks light from one side. A grid controls spread in all directions at once.

When to use a grid

Grids are useful when you want to:

  • Keep light off the background. This helps darken a backdrop or keep the wall from lighting up.
  • Darken the background in low-key portraits. A grid gives you a dark area around the subject.
  • Stop the key light hitting the backdrop. This matters in tight spaces.
  • Reduce flare. A grid can cut flare from a rim light aimed toward the lens.
  • Light only part of a set. The grid confines the light to the area you need.

A strip box with a grid is the standard setup for controlled rim or edge light on people and products.

Grids also work well with gelled or colored light, because they keep the color from spilling into other parts of the scene.

When to skip a grid

Grids are not for every shot. Skip the grid when you:

  • Shoot group portraits, which need wide, even coverage
  • Want soft, wrapping light that spills and fills
  • Work quickly outdoors, where changing light makes an extra step slow you down

Light loss and exposure

A grid costs some light on the axis of the beam, commonly about one-third to one stop, though the figure varies by product. Plan your power accordingly. If you need the same exposure with a grid, you may need to turn the light up or move it closer.

Choosing a grid for your softbox

Grids are sold matched to a softbox size and shape. Check the fit before you buy.

  • Grids work best on softboxes with a recessed front panel, which keeps the grid’s position stable.
  • The usable area is smaller with a grid. The subject has to sit inside the beam.
  • Gridded light falls off at its edges, so position the subject carefully.

Deep octaboxes are more directional and take grids better than shallow ones. For a shape choice, see octabox vs rectangular softbox.

Tips for using a grid

  • Aim precisely. A grid reduces the margin for error. Move the softbox carefully and test until the subject is evenly lit.
  • Control the background. Use the grid to keep light off a cluttered or bright background.
  • Add flags if you still get spill. Black foam core or flags can block light that gets past the grid.
  • Adjust power. The grid narrows the beam, so the subject may get slightly less light.
  • Practice on a mannequin or still life. It’s easier to learn placement before a client shoot.
  • Use a modeling light if you have one. It shows the light pattern while you position the box.

Common misconceptions

  • A grid makes light hard. It doesn’t. The source size stays the same.
  • A grid is a snoot. A snoot gives a tight spot. A grid gives a soft-edged pool.
  • A grid is a flag. A flag blocks light from one side. A grid controls spread in all directions.
  • Grids are only for low-key work. They help in any small room where spill is a problem.

Safety

Sandbag stands when you add a grid to a large softbox, since the box is still a sail in wind. Keep the grid secured, because a loose grid can drop onto a model or a light.

For tighter product lighting, see how to photograph something reflective.

The complete guide to lighting gear

Best Studio Lighting Kits for Photography (Including Beginner Picks)
Read the guide

Keep exploring

Guides from other topics

All topics →