Short answer
A floodlight is a broad, high-intensity light that covers a large area evenly. Its purpose is area lighting: giving enough light across a wide space to see, work, or make a space feel lit. Common uses include security, sports fields, building facades, parking lots and work sites.
In photography and film, the word means something a little different. A photographic floodlight is a broad, unfocused continuous light used for fill or general illumination, often a bulb in a reflector bowl.
Floodlight vs spotlight: beam angle
The main difference between a floodlight and a spotlight is beam angle. Floods are wide, roughly 45 degrees to more than 120 degrees. Spots are narrow, usually under 45 degrees and often 15–30 degrees.
Watts don’t measure brightness. Compare lumens instead.
NEMA beam spread types
Outdoor fixtures are often labeled with NEMA beam spread types. These are the approximate ranges:
- Type 1: 10–18 degrees
- Type 2: 18–29 degrees
- Type 3: 29–46 degrees
- Type 4: 46–70 degrees
- Type 5: 70–100 degrees
- Type 6: 100–130 degrees
- Type 7: 130 degrees and wider
Check the label on the product to confirm the beam type for the area you want to cover.
Common uses outdoors
- Security and safety. Floods light up dark areas around homes, businesses and perimeters. Many use motion sensors or dusk-to-dawn controls.
- Sports and events. Floods light football pitches, baseball fields, tennis courts and stadiums so games can be played after dark.
- Commercial and industrial sites. Parking lots, loading docks and construction yards benefit from broad visibility for people and vehicles.
- Architecture and landscape. Floods highlight building facades, bridges and large trees.
- Outdoor events. Concerts, festivals and gatherings use floods to keep spaces bright after dark.
Floodlights in photography and film
In a studio, a floodlight is a continuous light. It’s broad and soft-edged, which makes it useful for fill, for general illumination, or for a simple light that you can see as you work.
Classic photofloods were tungsten bulbs at about 3200–3400K. Modern photo floods are usually LED continuous lights. Fresnel film lights can switch between flood and spot by moving the bulb.
A photo floodlight is not a security light, even though both spread light widely. For a deeper look at continuous light in the studio, see our continuous lighting guide.
Halogen, LED and lumens
Halogen work floods, often around 500 W, have largely been replaced by LED floods of roughly 50–100 W. LED efficacy is roughly 80–150 lumens per watt, depending on the product, far above halogen.
Residential outdoor floods often range from about 700 to 3,000 lumens. Color temperature runs from about 3000K (warm) through 4000K (neutral) to 5000K and above (daylight-like).
Controls and placement
Floods can be controlled with:
- Motion sensors
- Dusk-to-dawn photocells
- Timers
- Smart apps
Aim floods down and away from roads to avoid blinding drivers. Brighter isn’t always better: glare and light trespass annoy neighbors and reduce visibility. Outdoor floods should carry a weather rating, such as IP65 or higher.
Common misconceptions
- Floodlight and spotlight are not interchangeable. Beam angle is the difference.
- Watts measure brightness. They measure power use. Compare lumens for brightness.
- Brighter is always better. Glare and light trespass reduce how useful a flood is.
- A photo flood is a security light. It isn’t, though both spread light widely.
Safety
- Outdoor fixtures need weatherproof boxes and GFCI-protected circuits.
- Halogen floods run very hot. Keep them clear of anything flammable.
- Aim floods down and away from roads so they don’t dazzle drivers.
For floodlights with built-in cameras, see whether flood lights can have cameras.