Short answer: radio triggers are the usual choice for studio lights
A wireless flash trigger sends a signal from the camera to the lights so they fire together. Most current studio setups use radio triggers, which typically run on 2.4 GHz and work around corners and outdoors. Optical and infrared triggers are older or simpler options that need line of sight.
Pick one system and stay with it, so one transmitter controls every light as you add more.
Trigger types: optical, infrared and radio
- Optical. A slave cell on the flash sees the flash from another unit and fires. It needs line of sight, and it can misfire when TTL pre-flash is used.
- Infrared. Uses an infrared signal from a transmitter in the hot shoe, such as the Nikon SU-800 or Canon ST-E2. It also needs line of sight.
- Radio. The most common type today. It works through walls and corners, and it’s usually more reliable outdoors.
Radio is the default for studio work. Optical and infrared still have a place for simple setups, or where a camera’s built-in flash system already handles them.
Radio systems and brand ecosystems
Common radio systems include:
- Godox X (X2T, XPro II, X3)
- Profoto AirTTL (Connect, Connect Pro)
- Canon RT (ST-E3-RT)
- Nikon (WR-R10 with SB-5000)
- Elinchrom Skyport
- PocketWizard
Radio systems from different brands usually don’t work together. Flashpoint gear is rebranded Godox and works on the Godox X system, which is the main exception to note.
Godox X2T, for example, offers 32 channels, five groups (A to E) and wireless IDs from 01 to 99. The quoted range is about 100 m, though real range varies with conditions.
Camera-brand transmitters and receivers
Transmitters are usually specific to the camera brand, because they plug into the camera’s hot shoe or sync port and need the right connection. Check compatibility with your camera before buying.
Lights either have built-in receivers or need a separate receiver on the sync port, the PC socket or a 3.5 mm port. Confirm which you have.
Setup: channel, ID, groups and power
A standard setup goes like this:
- Set the same channel and wireless ID on the transmitter and every light or receiver.
- Assign each light to a group, such as A, B and C, so you can adjust them together. Multiple off-camera flash techniques covers how to use groups for key, fill and rim.
- Set each light to manual (M) or TTL, depending on the work. TTL vs manual flash explains the choice.
- Set the power for each group.
- Test fire every light before shooting.
Test firing is the most reliable way to catch a mismatched channel or ID before the session starts.
TTL, manual and high-speed sync
Manual-only triggers simply fire the flash. TTL triggers also pass exposure information and let you control the power of the flash remotely. Not all triggers support TTL, so check the spec before you assume it works.
High-speed sync (HSS) lets you shoot faster than the normal sync speed, but it needs a trigger and a flash that both support it. It costs a lot of power, as covered in balancing flash and ambient light.
Sync speed and trigger latency
Typical sync speeds are around 1/160 to 1/250 s, depending on the camera. A trigger can add latency, and that delay can force a slower shutter speed than you expect. If you see a black band at the edge of the frame, the shutter may be faster than the flash can fire. Lower the shutter speed to the camera’s sync speed, or check the trigger’s specification.
Triggers don’t raise the sync speed. Only HSS lets you shoot faster.
Troubleshooting: interference and misfires
- Lights don’t fire. Check the channel and ID match, the batteries, and the receiver connection.
- Lights fire late or inconsistently. Check for interference from other radio gear and change the channel or wireless ID.
- Optical slaves misfire with TTL. Use a trigger that ignores pre-flash, such as a Godox S2-type slave, or set the master to manual.
- Interference from other users. Change the channel or set a unique wireless ID.
Common misconceptions
- All triggers support TTL or HSS. They don’t. Check the specification.
- Triggers raise the sync speed. They don’t. Only HSS lets you shoot faster.
- Radio systems from different brands work together. Usually they don’t. Flashpoint and Godox are the exception.
- Radio needs line of sight. It doesn’t, which is one of its main advantages.
Safety
Some older flashes have high trigger voltages. Vivitar 283 units, for example, can exceed 250 V and damage modern cameras and triggers. Check the trigger voltage before using an older flash with a modern camera.
For a budget trigger and an upgrade path, see cheap lighting kits. For a full ecosystem comparison, see the best studio lighting kits guide. To test your trigger setup with a first light, see how to set up photography lights for beginners.