Portrait Lighting

How to take good pictures in bright sunlight?

Take good photos in bright sun: move into shade or turn the subject, diffuse and reflect the light, expose for the face, and add fill flash if needed.

On this page
  1. The short answer
  2. Why bright sun is hard
  3. Move into open shade
  4. Turn the subject
  5. Diffuse and reflect
  6. Exposure settings
  7. Fill flash and the sync-speed limit
  8. Filters
  9. Phones
  10. Common mistakes

The short answer

In bright sun, move the subject into open shade, or turn them so the sun is behind or beside them. Then soften the light with a diffuser or reflector, expose for the face, and add fill flash if the shadows are still too deep.

Why bright sun is hard

Midday sun creates very high contrast. Shadows block up, highlights clip, and the light falls almost straight down. That produces dark eye sockets and harsh nose shadows, and it makes people squint. Settings alone rarely solve this, so change the light first.

Move into open shade

Open shade is the simplest fix. Look for a building edge, an awning or the shade under a large tree. Avoid dappled light, where sun breaks through leaves, because it leaves spotty hot spots on the face.

Turn the subject

If you can’t move, change how the subject faces the sun:

  • Sun behind the subject (backlight): creates a glow around the hair and shoulders. Expose for the face, or add fill.
  • Sun to the side (sidelight): adds shape and texture, with the sun at about 90 degrees to the camera.
  • Keep the sun out of the eyes: people squint, and the light is harsh on the face.

A lens hood reduces flare, but shooting into the sun can still cause it.

Diffuse and reflect

  • Scrim or diffuser: a translucent frame between the sun and the subject cuts about 1 to 1.5 stops and softens the shadows.
  • Reflector: bounces light back into the shadow side of the face. The white or silver side works well for fill, and the gold side warms the skin.
  • Light surfaces: a white wall or a light-coloured paving can bounce light too, if you check how it looks on the screen.

Exposure settings

  • Sunny 16 as a starting point: in full sun, use f/16 with a shutter speed of 1 over your ISO. At ISO 100, that is f/16 at 1/100 s.
  • Use base ISO: usually 100, though some cameras use 64 or 200.
  • Expose for the highlights: blown highlights can’t be recovered in editing, but shadows can be lifted.
  • Shoot RAW: you get more room to recover highlights and shadows afterwards.

Fill flash and the sync-speed limit

Fill flash is one of flash’s main uses in daylight. Set it to about −1 to −2 EV so it lifts the face without looking flashed. For the full method, see balancing flash and ambient light.

Above your camera’s sync speed, which is often around 1/200 to 1/250 s, flash needs high-speed sync (HSS) or an ND filter. HSS costs about 1 to 2 stops of effective power. ND filters cut light by a set number of stops: an ND8 filter cuts three stops, so f/2.8 at sync speed replaces f/8.

Filters

A circular polariser deepens blue skies and reduces glare. It works most strongly when it is at 90 degrees to the sun, and it costs about 1 to 2 stops of light.

Phones

Tap on the face to set the exposure. HDR mode helps with high-contrast scenes, so check that the skin still looks natural in the result.

Common mistakes

  • Keeping the sun at your back. It causes squinting and flat light.
  • Wearing sunglasses. They hide the eyes and reflect the scene.
  • Assuming bright means easy. The contrast can exceed what the sensor can record.

Never look at the sun through an optical viewfinder or a long lens, and don’t leave a camera pointed at the sun. For more outdoor options, see what is the best lighting for outdoor pictures and outdoor fashion photography lighting tips.

The complete guide to portrait lighting

What Lighting Do You Need for Portrait Photography?
Read the guide

Keep exploring

Guides from other topics

All topics →