Portrait Lighting

How to Light a Headshot at Home for LinkedIn and Business Profiles

Light a headshot at home with one softbox or a window at about 45 degrees, plus tips on camera, catchlights, glasses and LinkedIn sizing.

On this page
  1. The short answer
  2. Set up the room
  3. Window setup
  4. Artificial setup
  5. Camera and lens
  6. Settings
  7. Catchlights
  8. Glasses
  9. Sizing for LinkedIn
  10. Common mistakes

The short answer

At home, one softbox or a large window placed at about 45 degrees to the side of the subject, slightly above eye level, gives a flattering headshot. Add a white reflector on the shadow side, and use a plain background 1 to 2 m behind the subject.

Set up the room

  • Turn off room lights. Overhead bulbs cast shadows under the eyes and mix colour temperatures with daylight.
  • Choose a plain backdrop in neutral grey, blue or soft white.
  • Keep the subject 1 to 2 m (3 to 6 ft) from the background for separation and soft background blur.

Window setup

  • Seat the subject at about 30 to 45 degrees to a large window.
  • Avoid direct sun. Diffuse it with sheer curtains, or wait for indirect light.
  • Place a white reflector or foam board on the shadow side.
  • Don’t face a backlit window. The face goes dark without fill, so keep the window to the side.

Artificial setup

  • One softbox (24 to 36 in) or umbrella, about 1 m from the face, at about 45 degrees and slightly above eye level.
  • Aim for a ratio of about 2:1 to 3:1 for a gentle, professional look. A reflector on the shadow side helps here.

Camera and lens

  • Use a focal length of about 85 to 135 mm (full-frame equivalent). Keep the camera about 1.5 to 3 m from the subject.
  • On a phone, use the 2x or 3x rear lens rather than the selfie camera. The wide selfie lens distorts the face at arm’s length.
  • Hold the camera at eye level or slightly above, with the subject a little forward and the chin down.

Settings

  • Aperture around f/2.8 to f/5.6.
  • ISO 100 to 400.
  • Shutter speed of 1/125 s or faster.
  • A tripod with a timer or a remote, so the camera stays still.

Catchlights

Place the catchlight at about 10 or 2 o’clock in both eyes. A light at 45 degrees to the side usually produces it there. Check the catchlight on the back of the camera, and move the light if it’s missing.

Glasses

Glasses reflect the light. Raise the light, move it further to the side, or tilt the arms of the glasses up slightly so the glare moves off the lenses.

Sizing for LinkedIn

LinkedIn’s recommended photo size and crop change from time to time, so check the current guidance before uploading. A square crop of at least 400 x 400 px, with the head and shoulders filling about 60 percent of the frame, is a common target. LinkedIn shows profile photos in a circle, so keep the face centred.

Common mistakes

  • Selfie mode. The wide lens distorts the face at arm’s length.
  • Overhead room lights. They cast shadows and colour casts.
  • A backlit window. The face goes dark without fill.
  • A ring light as the default. Many business headshots use soft, directional light instead, although a ring light can suit some styles.

For the basic light patterns behind this setup, see what lighting you need for portrait photography. For a home studio set up for model work, see model photography at home.

The complete guide to portrait lighting

What Lighting Do You Need for Portrait Photography?
Read the guide

Keep exploring

Guides from other topics

All topics →