The short answer
Rembrandt lighting puts one key light about 45 degrees to the side of the subject and above eye level. Then check for the small triangle of light on the shadow-side cheek. If the nose shadow closes off the triangle, the light is in about the right place.
What Rembrandt lighting looks like
Rembrandt lighting is named after the Dutch painter Rembrandt van Rijn (1606 to 1669), whose portraits often used strong light from one side. In a Rembrandt portrait, one half of the face is lit, and a small, inverted triangle of light sits on the shadow-side cheek, just below the eye. The rest of the shadow side stays in shade.
Step 1: place the key about 45 degrees to the side
Place the key roughly 45 degrees to the side of the subject’s face. Start with one light, such as a window, a softbox or a flash, so you can see the pattern clearly.
Step 2: raise it above eye level
Raise the light so it sits about 30 to 45 degrees above eye level, angled down toward the face. Some sources describe a light placed a little higher, with the subject turned toward it. Both can give the same pattern, so judge the result on the subject rather than the number.
Step 3: check the triangle
Look at the shadow side of the face and check three things:
- The triangle is no longer than the subject’s nose.
- It is no wider than the subject’s eye.
- The nose shadow and the cheek shadow meet and close off the triangle.
If the shadow-side eye is in complete darkness, the key is probably too far to the side. If the eye has no catchlight, try lowering the key or bringing it closer to the camera.
When it misses
- The triangle is too big: the light is too far forward, and you are close to loop lighting. Move the key further to the side or higher.
- There is no triangle: the nose shadow and cheek shadow merge and cover the cheek. The key is too far to the side, and you are heading toward split lighting. Bring the light forward.
- The shadow side is too dark: add a reflector, or a fill light at lower power.
Turn the head
Turning the subject’s head changes the pattern as much as moving the light does. Short lighting, where the side of the face turned away from the camera is lit, is a classic pairing with Rembrandt and tends to slim the face.
Modifiers, fill and ratios
- Bare reflector or grid: crisp edges and a more dramatic shape.
- Small softbox or beauty dish: softer edges, with the triangle still visible if the light is placed correctly.
- Ratio: Rembrandt setups are often in the range of 3:1 to 8:1. If the shadow side needs lifting, add a reflector or a fill at about −1.5 to −3 stops.
The window version
A window works as the key. Seat the subject at about 45 degrees to the window, with a white reflector or foam board on the shadow side to lift detail. Turn off the room lights so the window is the main light source. For a dramatic version of the same idea, see split lighting portraits.
Common misconceptions
- “Any cheek patch counts.” The triangle has to be closed off by the meeting shadows.
- “It needs hard light.” Soft modifiers work when they are placed correctly.
- “The angles are fixed.” Face shape and nose length change where the light falls.
- “It’s always dark and moody.” With fill, Rembrandt lighting can look gentle.
Safety
Sandbag boom arms and stands when the key is high overhead. For the wider set of patterns, see what lighting you need for portrait photography.