A basic studio needs lights, a way to trigger them, stands, light modifiers, backdrop support and a few small items that keep setups safe and repeatable. You do not need premium brands to start. Budget strobe systems, including Godox, are widely used by working photographers.
Lights
You will see three main types:
- Monolights are studio strobes with their own power pack. They commonly range from about 200 to 600 watt-seconds (Ws), which is plenty for many home and small studio setups.
- Speedlights are smaller flash units and the budget option. They have less power, and they differ from monolights in recycle time and in which modifiers they support.
- Continuous lights, usually LED, show you the light in real time. Their output is generally lower than a strobe’s.
Battery-powered monolights, such as the Godox AD200 or AD400, let you work away from mains power.
Mounts and triggers
The Bowens S-type mount is the most common, and many budget systems use it. Profoto and Elinchrom use their own mounts, so modifiers do not always interchange with other brands.
For triggers, buy a radio transmitter from the same system as your lights, such as a Godox X, Profoto Air or Elinchrom Skyport. A matching system avoids compatibility problems.
Light stands and booms
Air-cushioned stands of about 8 to 13 ft (2.4 to 4 m) suit most lights. A C-stand with a boom arm is useful for overhead lights and hair lights. Sandbag every stand, as covered in the safety section below.
Modifiers
- Softboxes: common sizes are 24 × 36 in rectangles, 36 to 48 in octaboxes, and 12 × 36 in strip boxes. Grids narrow the light.
- Umbrellas: about 33 to 60 in, in shoot-through or reflective styles.
- Beauty dishes: about 16 to 22 in. They give a little more contrast than a softbox.
Reflectors, V-flats and flags
- A 5-in-1 reflector, about 32 to 43 in, typically has white, silver, gold, black and diffuser faces.
- V-flats are two 4 × 8 ft foam boards, usually white on one side and black on the other, hinged with gaffer tape. They bounce light or take it away.
- Flags and gobos block or shape light. Gobos cast patterns.
Backdrops and support
Seamless paper usually comes in 53 in (1.35 m), 107 in (2.72 m) or 140 in (3.55 m) widths. A 107 in roll is often 36 ft (11 m) long. Muslin and collapsible backdrops also work well.
Support can be a crossbar stand or a wall or ceiling roller system. A 107 in roll needs roughly 9 to 10 ft (2.7 to 3 m) of support width. For how to light the paper, see how to light a seamless paper backdrop at home.
Small essentials
- Gaffer tape, cloth-based with low residue, is the best tape for most studio work.
- A-clamps and extension cords, ideally heavy-gauge.
- Sandbags, about 10 to 20 lb (5 to 10 kg) per stand.
- A grey card or colour checker for white balance.
- A light meter is optional. Some photographers use an incident meter such as the Sekonic L-308X. A histogram is free, but a meter is faster when you set lighting ratios.
- A tether cable (often USB-C, around 15 ft) and an active extension if you need more length.
What to buy first
Start with one light, one modifier, a stand, a trigger and a reflector. Add a second light when you have a specific need for it. For how these pieces work together, see the home studio lighting guide. Get backdrop support before the paper, because the paper needs something to hang from.
A basic starter studio can cost a few hundred dollars. Professional setups often cost several thousand. Prices change, so check current listings before you buy.
Common misconceptions
- Premium brands are not required. Budget strobes do the job for many working photographers.
- A ring light is not a complete studio lighting system. It is useful for some work but does not replace modifiers and separate lights.
- Speedlights and monolights are not interchangeable. They differ in power, recycle time and modifier support, so check that your modifiers fit.
- A light meter is optional if you use a histogram, but a meter is faster for setting ratios.
Safety
- Sandbag every stand and every boom counterweight.
- Use the maker’s charger for lithium flash batteries, and do not charge a damaged pack.