Short answer
For product photos, you can replace a lightbox with a window and a sheet of white foam board, a homemade tent made from a cardboard box or a translucent plastic bin, or a white shower curtain hung as a diffuser. A window is the cheapest option. A tent gives more even light around small items.
Window light and a foam board
A window is the simplest substitute. Place your product near the window, out of direct sun, and put a white foam board on the side opposite the window. The window gives soft, directional light, and the board bounces some of it back into the shadow side.
A basic setup is one light at about 45 degrees to one side of the product and a reflector on the other side.
A cardboard or plastic-bin tent
- Cardboard box. Cut openings in the sides and top, leaving a frame of about 1 to 2 inches (2.5 to 5 cm). Cover the openings with tissue paper, parchment or white muslin, and tape the edges.
- Translucent plastic bin. A white, translucent storage bin works as a ready-made tent. Place it over the product and light it from outside.
Light the outside of the tent from one side with a lamp or a window. Tissue paper is not color-neutral, and some types tint the light, so check your white balance.
For a purpose-built box with a seamless background, see how to make your own lightbox for photography.
Diffusion materials
| Material | Light quality | What to watch for |
|---|---|---|
| Parchment or baking paper | Soft and fairly neutral | Thin, so keep bulbs away from it |
| White rip-stop nylon | Smooth, even light | Check the color of the fabric at your white balance |
| White shower curtain or bedsheet | Soft | Can add a slight color cast |
| Tracing paper | Soft | Check for color tint |
| Tissue paper | Soft | Can tint the light |
Each layer costs roughly one stop of light, so use the fewest layers you need.
Backgrounds
You do not need a lightbox to get a white background. Tape a sheet of white poster board to the back and floor so it curves smoothly, with no crease, into a seamless sweep. Light the background so it is often about a stop brighter than the product. Your camera’s meter tends to push white toward gray, so expose a little brighter than the meter suggests.
Shiny and glass products
A fully enclosed tent can make shiny objects look flat. Put black cards near the edges of glass or metal items to define their outline. See how to avoid reflections in photography. A black acrylic sheet or a glossy tile under the product gives a reflective surface.
A tent does not fix a small or harsh light source. You still need a light that is reasonably large compared with the product.
Tracing and drawing: a different kind of lightbox
Some people search this phrase when they need a light for tracing or drawing. For that job, these options work:
- Tablet or laptop screen. Show a plain white image at full brightness, and tape your paper over the screen. Tape it down so it does not slip.
- Bright window. Tape the template and the blank paper to a sunny window to trace the light lines.
- Clear plastic tub. Turn a clear tub upside down, place a flashlight inside, and set the paper on top.
- LED tracing pad. A thin, USB-powered pad is inexpensive and easy to use.
Common mistakes
- Assuming you need a lightbox for a white background. An overexposed background does most of the work.
- Using a fully enclosed tent for shiny objects. Add black cards at the edges.
- Stacking too many diffusion layers. Each one costs about a stop.
- Using a small, harsh light. A tent does not fix a small source.
Safety
- Keep hot incandescent or halogen bulbs away from paper and fabric diffusers. LEDs are the safer choice.
- Keep power cords and tape away from hot lamps.