Flash Photography

What are some good portable ring lights for photography?

Portable ring lights are usually battery-powered LEDs. Compare sizes, color range, batteries and features to pick one for portraits, video calls or travel.

On this page
  1. Ring light vs ring flash
  2. Choose a size by how you shoot
  3. Color temperature and color quality
  4. Battery and power
  5. Dimming, flicker and mounting
  6. Examples to check
  7. Ring flash as a portable option
  8. Practical tips
  9. Safety

A good portable ring light for photography is usually a battery-powered LED model. For most portable work, a 10 to 14 inch ring is a practical size for portraits and video calls. An 18 inch ring gives more light, but you need a stand and a larger battery to move it. The right choice depends on where you shoot, how far the light sits from your subject, and whether you need it to run for a long time away from mains power.

Model lineups change often. Check current specifications and availability before you buy, because the examples in this article may no longer be on sale.

Ring light vs ring flash

Before you choose, decide which type you need:

  • A ring light is a continuous LED. You see the light before you shoot, and it’s easy to use for video and portraits. It’s much weaker than a flash, and it doesn’t freeze motion.
  • A ring flash is a strobe. It fires a short, powerful burst that can freeze motion. It’s usually more expensive, and it needs a flash trigger and battery.

This article covers LED ring lights. For the strobe type, see the ring flash for portraits guide.

Choose a size by how you shoot

  • About 6 to 10 inches: good for a phone, a selfie, or a desk. These units are low in output. A small 10 inch unit typically draws roughly 10 to 20 W, though this varies.
  • About 12 to 14 inches: a practical middle size for portraits, video and product shots at short range.
  • About 18 inches: brighter, but it needs a stand and it’s heavier. It can tip over easily, so weight the stand.

A ring light is most effective at about 0.5 to 1.5 m from the subject. Light falls off quickly beyond that. A bigger ring is softer at the same distance.

Color temperature and color quality

Many portable ring lights are bi-color. They can be adjusted between warm and cool, commonly across roughly 3200 K to 5600 K, though the range varies. Choose a unit with a range that covers the light you expect to match. Color temperature in Kelvin explains the scale.

Color rendering matters as well. Look for a high CRI or TLCI rating, often listed as 95 or higher on better units. This indicates how accurately the light shows colors.

Battery and power

Battery options vary a lot:

  • Small units often run from USB-C or a power bank.
  • Many 18 inch units use NP-F batteries, the Sony L-series style.

Check the runtime at the brightness you’ll use most. Advertised wattage doesn’t tell you how bright the light is. Lux measured at a set distance, such as 1 m, is a better comparison when the manufacturer publishes it.

Use only rated batteries. Cheap clones without protection circuits can be unsafe, so buy from a reputable source.

Dimming, flicker and mounting

Look for these details before you buy:

  • Dimming range: a wide range, such as 1 to 100%, gives more control over exposure.
  • Flicker-free operation: important for video, where flicker can show as bands in the footage.
  • Mounting: a standard 1/4 inch-20 tripod thread lets you mount the light on a stand.

Clip-on phone rings have low output. They’re fine for selfies and video calls, but they won’t light a portrait well at a distance.

Examples to check

Some product lines that photographers often look at include:

  • Lume Cube Ring Light Mini and Pro models for small, portable use.
  • Neewer 10 inch kits, and the Neewer 18 inch RL-18 type with an NP-F battery option.
  • Godox LR series units, including the LR120, LR150 and LR160, with battery models.

Specifications and availability change, so check the current listing before you buy. If you’d rather build one, see how to make a homemade ring light.

Ring flash as a portable option

If you need more power or the ability to freeze motion, a battery-powered ring flash is an option. The Godox AR400 is one example. It offers around 400 Ws of output and can also run as a continuous LED. It’s heavier and more expensive than an LED ring, and it needs a trigger. For what a ring flash does in a portrait, see ring flash for portraits.

Macro ring lights are a separate category for close-up work. They suit product and insect shots more than portraits.

Practical tips

  • Place the light close to the subject, within about 0.5 to 1.5 m, to get the most output.
  • Use a stand that’s rated for the weight of the light, and add weight to the base if you’re outdoors.
  • Diffuse the light if it’s harsh. A diffuser on an LED ring softens the output, though it reduces brightness.

Safety

  • Use only rated NP-F or lithium-ion batteries, and avoid cheap clones without protection circuits.
  • Weight stands that hold 18 inch rings, because they tip easily.

The complete guide to flash photography

Flash Photography for Beginners: A Complete Tutorial
Read the guide

Keep exploring

Guides from other topics

All topics →