Most guides group flash into three hardware types: built-in or pop-up flash, hot-shoe speedlights (also called flashguns), and studio strobes. Other sources use different groupings, such as in-camera, on-camera and off-camera, or groupings by mode such as TTL, manual and multi. None is the official list, so the sections below use the hardware split and explain the alternatives.
Built-in or pop-up flash
Built-in flash sits in the camera body, close to the lens axis. Because it fires almost straight at the subject, it often gives harsh light, hard shadows, and a dark background.
Its power is limited. Guide number (GN) is a rough measure of flash power, calculated as distance multiplied by f-number at ISO 100. Built-in units typically have a GN of about 10 to 13 m, so they reach only a few meters in practice. They’re useful for quick fill, not for lighting a room.
Some camera models can use the built-in flash to control off-camera flash units, but support varies by model.
Hot-shoe speedlight
A speedlight mounts in the camera’s hot shoe, the connector on top of the camera. It communicates with the camera and usually supports TTL. Its head tilts and swivels, so you can bounce the light off a ceiling or a wall. Many speedlights can also be used off-camera with a trigger or cable.
Full-size speedlights typically have a GN of about 40 to 60 m, measured at a stated zoom setting. The figure varies by manufacturer. Speedlights run on AA batteries or a rechargeable lithium-ion pack, depending on the model.
Studio strobe
Studio strobes are the most powerful type. They’re used with modifiers such as softboxes and umbrellas, mostly off-camera.
Typical output is in the hundreds to over a thousand watt-seconds (Ws), and there are two main forms:
- Monolights are self-contained units with the power supply and flash head in one body.
- Pack-and-head systems have a separate power pack and one or more heads, connected by cable.
Studio strobes have a modeling lamp, which is a continuous light that shows roughly where the flash will fall. They can run on mains power or battery.
Some battery-powered “pocket” strobes blur the line between speedlights and studio strobes. Product names differ by brand, so check the specifications rather than the label.
Flash, speedlight and strobe: what the terms mean
People use these words loosely, so it helps to define them:
- Flash is the general term for any artificial light that fires briefly.
- Speedlight usually means a hot-shoe flash unit. The name is used by Nikon, and Canon uses “Speedlite” for the same type of product.
- Strobe usually refers to studio-style units, such as monolights and pack-and-head systems.
Because brands use these terms differently, a speedlight and a strobe aren’t always interchangeable. Check the power, mounting and battery options of the specific unit you’re considering.
Other ways to group flash
The three-type split is a convenient starting point. Flash can also be grouped in other ways:
- By mode: TTL (automatic), manual and multi (repeated bursts, also called stroboscopic).
- By sync timing: front-curtain sync (the default), rear-curtain sync, and high-speed sync.
- Phone flash: most current phones use LED lights. Xenon flashes are rare on phones.
- Specialized units: ring flashes and twin flashes are sometimes listed as separate types, mainly for macro work. The ring flash guide covers the portrait use.
Fill flash, red-eye reduction and slow sync are modes, not hardware types. They describe how a flash is used rather than what it is.
Which type to choose
- For a beginner, a speedlight is the usual choice. It supports TTL, bounce and off-camera use, and it’s what most tutorials assume.
- For quick snapshots, built-in flash is enough, but its light is hard to shape.
- For studio work or when you need a lot of power, a studio strobe is the better tool. The best studio lighting kits guide compares strobe kits.
- For events, many photographers use speedlights because they’re portable and fast to set up. The TTL vs manual guide explains which mode suits moving subjects.
If you’re deciding between a flash and a continuous light, note that LED ring lights and similar lights run all the time and don’t freeze motion. The portable ring light guide covers that difference.
Common misconceptions
- Watt-seconds aren’t brightness. Ws measures the energy a unit stores and releases. Efficiency and modifiers also change how bright the light looks.
- Speedlight and strobe aren’t defined the same way by every brand, so check the specifications instead of relying on the name.
- Built-in flash can’t be used off-camera is not always true. Some camera models can trigger other flashes, but the support varies.
For a broader introduction to using flash, see flash photography for beginners.